Receivers

Sub-model

Remotus RX110

Receiver for industrial cranes and other control

The Remotus RX110 receiver is pre-programmed with 11 different application programs. 11 outputs, 4 alternating relays and 7 open relays, of which 1 safety relay. The receiver has a multi-transformer for universal use. The receiver is rated to safety class IP67.

Remotus RX161

Receiver for hoists, cranes, pumps and other control

The Remotus RX161 receiver is pre-programmed with many different application programs. 16 outputs, 4 alternating relays and 12 open relays, of which 6 safety relays. Can be expanded with an additional 16 relays. The receiver has a multi-transformer for universal use. The receiver is rated to safety class IP67.

Remotus RX161(Metal)

Receiver in metal for hoists, cranes, pumps and other controls

The Remotus RX161 metal receiver is pre-programmed with 16 different application programs. 16 outputs, 4 alternating relays and 12 open relays, of which 6 safety relays. It has a multi-transformer, supply voltage: 24/48/115/230 V AC or 24 V DC. The receiver is made of powder coated sheet metal.

Remotus RX182

Remotus RX182

Remotus RX182 is programmable with 18 different functions that can be customized to meet the user’s needs. Remotus RX182 is used to control machinery that requires many motions and speeds. The number of functions can easily be expanded if necessary. The standard model has 18 relay outputs, two slots for expansion boards and two serial COM ports.

Remotus T-Rx 100

CANopen receiver for control via PLC

Remotus T-Rx 100 is a CANopen based receiver for controlling via control units (PLC). The receiver is made to handle tough conditions like wide fluctuations in temperature, dust, vibrations, oil and humidity. The receiver has double microprocessors that monitor each other. Every transmission is checked before the function is activated and diagnostic testing is done during operation. The emergency stop function is certified to PL d, Cat 3, EN ISO 13849-1.

Cable control available

In cases where remote control is not allowed or there is no charged battery available, the control system can use a cable between the waist transmitter and receiver. The receiver measures the voltage of the transmitter when cable control is used.